22.05.2020»»пятница

User Manual Chapin 10030 2-liter Multi-purpose Sprayer

22.05.2020

I recently bought this sprayer (Chapin 20541) from Amazon because I’ve always found these sprayers to be good value for the price (I have several). When I received this one, I noticed the tank adapter fitting was damaged. The sprayer still worked, and as I needed it quickly, I put it in service so I couldn’t return it to Amazon. Rittenhouse now carries several replacement parts and accessories for Chapin Sprayers and Backpack Sprayers. Refer to the chart below to see what is offered and what model it is compatible with before ordering. Read customer questions about Chapin 2 Liter Multi-Purpose Sprayer (10030) and get help with Chapin 2 Liter Multi-Purpose Sprayer (10030) Ask A Pro: 866-581-7378 Mon-Fri 9am-5pm ET Live Chat Email Us. Backpack, Use and care manual, Warning. Read online or download PDF. Chapin 61500 User Manual Manuals Directory ManualsDir.com - online owner manuals library Search.

Advertising

Hazard: Improper use or failure to follow instructions can result in explosive failure causing

serious eye or other injury.

For safe use of this product you must read and follow all instructions.

Do not leave a pressurized sprayer in the hot sun. Heat can cause pressure build-up. Do not store

or le

ave solution in tank after use. Always wear goggles, gloves, long sleeve shirt, long pants and full

  1. Chapin 20541, 1 Gallon Lawn, Garden and Multi-Purpose Sprayer with Foaming and Adjustable Nozzles, Translucent White 4.4 out of 5 stars 704. Installation Manual pdf Warranty & Support Product. This is for the casual user, the homeowner, and maybe a small jobber or handyman.
  2. Chapin Store Filter Results. Filter Close. Selected Filters Clear. Chapin 10030 2-Liter Multi-Purpose Sprayer Sprayer - Model #10030. 2-liter poly bottle. Download Manual. Find Retailer. Chapin 1054 48-Ounce Foam Hand Sprayer Sprayer - Model #1054.

foot protection when spraying. Never use any tool to remove pump if there is pressure in sprayer.

Never stand with face or body over

top of tank when pumping or loosening pump to prevent eject-

ing pump assembly and/or solution from striking and injuring you. Never pressurize sprayer by any

means other than the original pump. Do not attempt to modify or repair this product except with

original manufacturer’s parts. Never spray flammable materials or heat, pressure, or gas produc-

ing chemicals. Always read and follow manufacturer’s instructions before use with this sprayer

as some chemicals may be hazardous when used with this sprayer.

WARNING!

Sk-1113-1

Parts, Piezas, Pièces

6-6091

Hose Brown

Manguera Castaño

Tuyau Brun (1949)

6-6092

Hose Black

Manguera para trabajos

pesados Negro

Tuyau pour service

intense Noir

6-6062

Shut-off Handle

Mango de cierre

Poignée du robinet

Repair Parts Kit Gaskets and Seals (not included),

Juego de piezas de reparación, empaquetaduras y juntas (no incluido)

Kit de pièces de réparation, joints et garniture d’étanchéité (non inclus) 6-4629

Printed in USA

1. Hose to Tank

2. Nozzle

Attach the hose by screwing

the swivel nut clockwise and

tightening to 37 in. lbs. Refer

to Pre-use check before using.

Attach nozzle to shut-off handle or extension wand.

1) Do: Check tightness of hose nut to be sure hose is securely attached to the tank outlet.

2) Do: Inspect hose for deterioration, cracks, softness, or brittleness. If any of these conditions are found, replace hose before

using. Replace with original manufacturer’s parts only.

3) Do: Remove pump (see Filling, Pressurizing and Spraying Instructions), inspect interior and exterior of tank for signs of

deterioration of body and bottom. Any sign of deterioration indicates possible tank weakening and could result in

explosive bursting under pressure. If any of these signs are found, discard tank immediately and replace. Do not attempt

to patch leaks, etc., as this could result in serious injury.

4) Do: Follow Filling, Pressurizing and Spraying Instructions, except use water only.

5) Do: Pump plunger 8-10 strokes and inspect for leaks.

6) Do: Direct shut-off away from you and open to make sure discharge is not clogged.

7) Do: If unit passes this test, release pressure (see Pressure Releasing Instructions), empty tank, and proceed with Filling,

Pressurizing and Spraying Instructions.

3. Pre-Use Check

4. Filling

1) Do: Turn pump handle counterclockwise and remove pump

2) Do: Prepare spray solution following all directions and safety warnings on chemical label.

3) Do: Fill tank to no more than the proper gallon marker. Do NOT: overfill to accommodate pump.

4) Do: Check pump to make sure that no grass or dirt is stuck to barrel. Replace pump in tank and tighten securely.

5. Pressurizing and Spraying

7. Care, Storage and Maintenance

1) Do: Rinse tank thoroughly with water only, empty, refill with water. Follow Filling, Pressurizing and

Spraying Instructions, except pump unit only 8-10 strokes.

2) Do: Open shut-off and allow water to run through discharge assembly.

User Manual Chapin 10030 2-liter Multi-purpose Sprayer Parts

3) Do: Release pressure (Follow Pressure Release Instructions), remove pump and empty sprayer.

4) Do: Store sprayer tank upside down, with pump removed, in a warm dry location.

5) Do: Periodically oil pump by dropping 10-12 drops of light oil down pump rod through opening in cover.

ADVERTENCIA!

Peligro: El uso inapropiado o el no seguir las instrucciones puede resultar en una falla explosiva y causar

serias lesiones oculares o de otro tipo. Para el uso seguro de este producto, usted debe leer y seguir todas

las instrucciones. No deje el pulverizador presurizado expuesto al sol. El calor puede causar el aumento

de la presión. No almacene o deje la solución en el tanque después de usar. Cuando utilice el pulveriza-

dor siempre utilice anteojos protectores, guantes, camisa de manga larga, pantalones largos y protec-

ción completa en los pies. Nunca utilice ninguna herramienta para retirar la bomba si hay presión en el

pulverizador. Nunca se ubique con el rostro o cuerpo sobre la parte superior del tanque cuando bombee

o suelte la bomba para evitar que la eyección del montaje de la bomba y/o la solución lo golpee y lo last-

ime. Nunca presurice el pulverizador con cualquier otro elemento que no sea la bomba original. No trate

de modificar o reparar este producto, excepto con las partes originales del fabricante. Nunca pulverice

material inflamable o químicos que produzcan calor, presión o gas. Siempre lea y siga las instrucciones

del fabricante antes de usar el producto ya que algunos químicos pueden ser peligrosos al usarse con este

pulverizador.

1. Manguera Para el Tanque

Sk-1113-2

6-5943

Nozzle 1.0 GPM

Tobera

Buse

6-7703

Extension wand,

Vara de extensión, Rallonge (1949)

6-7734

Extension wand,

Vara de extensión, Rallonge (1979)

WARNING:

Handling the brass parts of this product will expose you to lead, a chemical known

to the State of California to cause birth defects and other reproductive harm. Wash hands after

handling.

PRECAUCIÓN:

El manejo de las partes de latón de este producto lo expondrá al plo-

mo, un agente químico que en el Estado de California es conocido por provocar defectos

congénitos y otros daños reproductivos.

Lávese las manos después de usarlo.

Congratulations!

You have just purchased a quality Chapin product.

Register Your Sprayer Online @ www.chapinmfg.com
Questions?

Do Not Return To Store.

Call us @ 1-800-950-4458 or www.chapinmfg.com

¡

Felicitaciones!

Usted acaba de adquirir un producto de calidad Chapin.

Registre su pulverizador en línea en www.chapinmfg.com
¿Preguntas?

No regrese a la tienda;

llámenos al 1-800-950-4458 o visite www.chapinmfg.com
Félicitations!

Vous avez acheté un produit de qualité Chapin.

Enregistrez dès que possible votre pulvérisateur en ligne à l'adresse suivante:

www.chapinmfg.com
Questions ?

Ne retournez pas au magasin.

Appelez-nous 1-800-950-4458 ou visitez le www.chapinmfg.com

010325-2 (A) R0808

6-5797

Nozzle .5GPM

Tobera

Buse

6-7745

Filtered outlet tube

Tubo de salida con filtro, Tube de sortie avec filtre (1979)

6-5373

Holster

Funda

Étui

Conecte la manguera atornillando la tuerca giratoria hacia la derecha

y ajustándola a 0,43 kg-m. Consulte la “verificación antes del uso”

antes de usarlo.

TO LOCK HANDLE:

Push handle down to

depress coil spring and

turn handle 1/4 turn

clockwise, then allow

handle to raise into

lock position.

TO LOCK PUMP:

Place

pump prongs down into

slots in funnel, turn clamp

clockwise to furthest

position under bottom

slot, then turn handle

clockwise until tightly

locked and sealed in place.

TO UNLOCK

PUMP:

Turn handle

counterclockwise until

3-prong clamp is loose.

Then rotate clamp

counterclockwise to

stop and lift out.

Lock

Position

6. To Release Pressure

1) Do: With pump facing away, turn locked handle counterclockwise until air begins to escape.

Stop turning handle when you hear air escaping.

2) Do: Stay away from the sprayer until all air has escaped.

TO RELEASE HAN-

DLE:

Push down to

depress coil spring and

turn handle counter-

clockwise 1/4 turn, then

lift handle.

Pump until you

feel resistance.

2. Boquilla.

Encaje la boquilla en la manija de la unidad de cierre o la vara de extensión.

Note:

Your particular sprayer may not include all parts pictured above.

Nota:

Es posible que este pulverizador en particular no incluya todas las partes que se ilustran arriba.

Remarque :

Votre pulvérisateur particulier pourrait ne pas inclure toutes les pièces illustrées plus haut.

Advertising
Popular Brands
Popular manuals

Warning, Pre-use check 9. care, storage and maintenance, Nozzle

Advertising

WARNING

3. Pre-Use Check

9. Care, Storage and Maintenance

010538-9 (A) R0412

WARNING:

Handling the brass parts of this product will expose you to lead, a chemical known to the State of

California to cause birth defects and other reproductive harm. Wash hands after handling.

2. Nozzle

Note:

Your particular sprayer may not include all parts pictured above.

Nota:

Es posible que este pulverizador en particular no incluya todas las partes que se ilustran arriba.

Remarque :

Votre pulvérisateur particulier pourrait ne pas inclure toutes les pièces illustrées plus haut.

Attach nozzle to extension wand (22790).

6-1898

Shut-off Handle

Mango de cierre

Poignée du robinet

Parts, Piezas, Pièces

6-6141

Hose Brown

Manguera Castaño

Tuyau Brun

6-7711

Extension wand

Vara de extensión, Rallonge (22180, 22170)

1-5941

Nozzle .5GPM

Tobera

Buse

Repair Parts Kit Gaskets and Seals (not included),

Juego de piezas de reparación, empaquetaduras y juntas (no incluido)

Kit de pièces de réparation, joints et garniture d’étanchéité (non inclus)

6-4601

6-3337

Straps

Tirantes

Sangles

6-7742

Extension wand

Vara de extensión, Rallonge (22790)

1-5797

Nozzle .5GPM

Tobera

Buse

2A

2B

22790XP

22180XP

22170 XP

Attach nozzle to shut-off handle or extension wand (22180, 22170).

1. Hose to Tank

Discharge/ Assembly

• Make sure white outlet tube is attached to outlet tube adapter (Fig. 1A).

• Insert the outlet tube portion of the discharge assembly into the tank adapter (Fig. 1B).

• Proper placement of white outlet tube (Fig. 1C).

• Firmly insert the outlet tube adapter into the tank adapter (Fig. 1D) Lining up tab

with notches on the tank adapter.

• Firmly tighten the retaining nut to the tank adapter (Fig. 1E).

Discharge

Assembly

1B

Outlet

Tube

1E

Retaining Nut -

Securely tightened.

1C

1D

No

Gap

Tank

Adapter

Outlet Tube

Adapter

Tab/

Notch

1A

Outlet Tube

Adapter

Outlet

Tube

4. Filling

1) Do: Turn pump handle counterclockwise and remove pump

2) Do: Prepare spray solution following all directions and safety warnings on chemical label.

3) Do: Fill tank to no more than the proper gallon marker. Do NOT: over fill to accommodate pump.

4) Do: Check pump to make sure that no grass or dirt is stuck to barrel. Replace pump in tank and tighten securely.

P.O. Box 549 700 Ellicott St.
Batavia, NY 14021-0549 U.S.A.
1-800-950-4458 www.chapinmfg.com

Sk-1154-1

WARNING: Improper use or failure to follow instructions can result in explosive failure causing serious

eye or other injury.

For safe use of this product you must read and follow all instructions. Do not leave a pres-

surized sprayer in the hot sun. Heat can cause pressure build-up resulting in possible explosion. Do not store or

leave solution in tank after use. Always wear goggles, gloves, long sleeve shirt, long pants and full foot protec-

tion when spraying. Never use any tool to remove pump if there is pressure in sprayer. Never stand with face or

body over top of tank when pumping or loosening pump to prevent ejecting pump assembly and/or solution

from striking and injuring you. Never pressurize sprayer by any means other than the original pump. Do not

attempt to modify this sprayer. Replace parts only with manufacturer’s original parts. Never spray flammable,

caustic, acidic, chlorine, bleach or other corrosive solutions or heat, pressure, or gas producing chemicals.

Always read and follow chemical manufacturer’s instructions before use with this sprayer as some chemi-

cals may be hazardous when used with this sprayer.

1) Do: Check tightness of hose nut to be sure hose is securely attached to the tank outlet.

2) Do: Inspect hose for deterioration, cracks, softness, or brittleness. If any of these conditions are found, replace

If its not, click the icon in the lower-right of windows and restart it, it should be called ARsim. B & r automation studio user manual. PVI is the interface that links between windows program (e.g. Automation Studio) and the automation runtime (ARsim or ARembedded or ARwin) where your code is actually running like on a PLC. If that happens i know you can restart it. Sometimes people run into problems when a 2-hour limit on using PVI runs out.

hose before using. Replace with original manufacturer’s parts only.

3) Do: Remove pump (see Filling, Pressurizing and Spraying Instructions), inspect interior and exterior of tank for

signs of deterioration of body and bottom. Any sign of deterioration indicates possible tank weakening and could

result in explosive bursting under pressure. If any of these signs are found, discard tank immediately and replace.

Do not attempt to patch leaks, etc., as this could result in serious injury.

4) Do: Follow Filling, Pressurizing and Spraying Instructions, except use water only (Pump plunger 10-20 strokes and

inspect for leaks).

5) Do: Direct shut-off away from you and open to make sure discharge is not clogged.

6) Do: If unit passes this test, release pressure (see Pressure Releasing Instructions), empty tank, and proceed with Filling,

Pressurizing and Spraying Instructions.

7) Do: Inspect all metal parts including the wand, nozzle and fittings for rust, corrosion and pitting. If any of these

conditions are found, replace affected part with original manufacturer’s part before using.

1) Do: Rinse tank thoroughly with water only, empty, refill with water. Follow Filling, Pressurizing and

Spraying Instructions, except pump unit only 8-10 strokes. Be sure that the wand and nozzle are

thoroughly rinsed with water after each use.

2) Do: Open shut-off and allow water to run through discharge assembly.

3) Do: Release pressure (Follow Pressure Release Instructions), remove pump and empty sprayer.

4) Do: Store sprayer tank upside down, with pump removed, in a warm dry location.

5) Do: Periodically oil pump by dropping 10-12 drops of light oil down pump rod through opening in

cover.

5. Pressurizing and Spraying

Do:

Turn handle clockwise to

tighten. Push handle down,

turn 1/4 turn counterclock-

wise to release.

Do:

Pump until you

feel resistance.

Do:

Push handle, down, turn

1/4 turn clockwise to lock. Begin

User Manual Chapin 10030 2-liter Multi-purpose Sprayer Home Depot

spraying. Re-pump sprayer as

required to maintain spray force.

5A

5C

5B

For constant spraying, push down on shut-off handle and move

locking mechanism away from you. To release, squeeze handle and

move the locking mechanism back towards you (Fig. 6A).

6. Fatigue-Free Spraying

6A

7. To Release Pressure

1) Your sprayer is equipped with a pressure relief/release valve

(Fig. 7A). To release pressure lift and hold the cap until air

is completely exhausted, OR, turn the valve slowly counter

clockwise until you hear air escaping and wait air is completely

exhausted (Fig. 7B).

2) Do: Stay away from the sprayer until all air has escaped.

7A

7B

8. Wand Dock Clip

Choose the holder that fits your wand.

6-4605

Pressure Relief Valve

Válvula de descarga de presión

Chapin 10030 2-liter Multi-purpose Sprayer

Soupape de décompression

Advertising

User Manual Chapin 10030 2-liter Multi-purpose Sprayer Troubleshooting

This manual is related to the following products:
Popular Brands

User Manual Chapin 10030 2-liter Multi-purpose Sprayer System

Popular manuals